Country Fresh!

This is actually a continuation of the last tutorial, "Angel Food." I've used the same fabric and the same inspiration: peasant blouses and dresses the girls saw in stores (like Zara and H&M)  all over Paris. Looking back at the Doll's Eye View report on Paris Fashion Week (Spring 2016), this "boho chic" trend was sparked by looks appearing on Chloe's catwalk show: cool, white cotton tops and dresses trimmed with cotton or crochet lace.

The real difference between this post and the last, is that the fabric in the other post has lots of fluff and bounce and these garments droop closer to the body. To achieve this look, you must first wash the fabric then resist the urge to iron it afterwards. These garments are also trimmed with either  (English) cotton lace or some sort of crochet trim. For these looks, I had some vintage crocheted trim on hand (that I had to bleach back to white). But you should be able to find something similar in the notions department of your local fabric store.


The standard peasant blouse has a "crochet yoke" and trim. Instead of going the route of a traditional drafted pattern, here is a quick and easy way of achieving the look without a pattern! Before we begin, cut a strip of fabric roughly twice the circumference of the doll's body wide by the length of the blouse you desire. For my blouse, this equated to 2.5" long x 9" wide (9x23 cm)

1. Wash the fabric in soapy water and rinse. Wring out the excess water. Allow to air dry.
2. When dry, seal the edges using an anti-fray product.
3. Trim the bottom edge with the same width of crochet lace. Set aside.
4. Take your trim and wrap around the doll.
5. Join the two ends at the center back of the doll then allow for overlap. (Later you will fold, sew and attach a fastener).
6. Cut two more strips of crochet lace and attach to the horizontal strip.
7. Stitch together at the front and the back. You now have a yoke.
8. Take the cotton strip of fabric you first created. Make a double row of running stitches. at the top. Pin it to the middle of the strip to the middle of the blouse then at end. Pull the threads to gather the fabric into the size of the "yoke." I have a detailed tutorial near the bottom of this post to better illustrate this process.*
9. Remove the blouse from the doll and stitch the back seam up to about the waist of the doll. You can press the seam open then attach snaps on the "yoke" and another about 1/2" (1cm) further down

Front to back, this is what your end result should resemble.

Here's another easy, breezy empire waist dress that's simple to make. All you need is a bit of crocheted lace, a length of embroidered cotton trim and a little string.
1. For the "bodice," I've used a one inch (2cm) crochet cotton lace. Again, I wrap it around the bust of the doll, joining the two edges at her center back. Be sure to leave enough to turn the edges down.
2. The skirt part is made using a 3 1/4" (9cm) wide embroidered cotton trim. I cut a length roughly 2.5 times the width of the doll. In my case, this measures about 17" (40cm). Make a double running stitch along the top edge. Pin the skirt at each end and then in the middle. Pull the threads to make the gathers and adjust so that everything is fairly equally spaced.  I have a detailed tutorial near the bottom of this post to better illustrate making gathers.*
3. Add a string to the center front point (which is used to tie around dolly's neck). Then stitch up the back to the waist and add a snap or two at the back.

 It's as simple as that!
Again, stitch up the back to about the waist. Then close the bodice with snaps or hook & eyes.

 Extremely popular is the tiered cotton dress. Again, you can make this dress without a pattern. This dress consists of three tiers, the first made with a 1-1/4" embroidered cotton lace trim.
1. For the first layer, I used a 1-1/4" (3cm) embroidered (English) cotton lace.
2. Wrap around the bust of the doll, leaving an overlap at the center back seam. Because this does not stretch, you will need to make a tiny dart under each bust to fit.
3. My second layer is a strip of cotton 1.5 times the width of the doll times the desired length which I have washed and dried first. (Again, it is recommended you use an anti fray product to keep the edges neat.) In my case, this is 7.5x2" (19x5cm).
4. Gather this second tier and sew onto the lower edge of the first tier.  I have a detailed tutorial near the bottom of this post to better illustrate making gathers.*

*Working with Gathers:

Put a double row of running stitches at the top of the strip.
1. Pin the center of one strip to the center of the other.
2. Pin the ends of the longer strip to the edges of the smaller tier.
3. Working from one side to the other, gently pull both lines of stitches at the same time. Be sure to pull the stitches made by the bobbin) as they are easier to manipulate.
4. Adjust the gathers as you go. The double stitches make it easy to do this and keeps things fairly stable.
5. Once everything has fit in well, place more pins in the gathered strip. Sew in between the two sets of stitches.

6. Here are the three tiers sewn together. Stitch the dress to about the waist. Use snaps or hook & eyes to fasten shut the dress.
7. Remove the running stitches that fall below the sewing line.

I decided to use 4 strips of ribbon for straps that tie over each shoulder.
Unfortunately, it's not as simple as tying each strap into a bow. I reinforce each bow by making a few hand stiches through the center knot..

When you finished, you might want to crush the dress in your hand to keep it close to the doll's body

Of course, the dress or the blouse is only part of the story. Aside from a jeans jacket, dolly will need something to toss over her shoulders on those cool days or nights.

You can create a crochet sweater without the skill! Use the same trim you used for the dress.

 

1. Prepare the trim. (My trim here is 2" (5cm) wide. Carefully cut two strips of trim of equal length. The length will depend on how long or short you want the jacket. Place it over the doll's shoulder until it falls at the desired length.
2. I close up the broken links with a few stitches to stabilize the edges first.
3. Here, I have used a thinner trim to finish what will result in the hem of my jacket.
4. Sew trim  to both raw edges
 
1. Place it over the doll's body front to back.
2. Leaving a space for the arms, lay the front edge over the back edge and pin.  Hand sew together with perfectly matched thread.
3. Repeat on the other side.
4. Join both sides together at the back. Pin, adjust, sew.
 When you have finished, no one will guess you did not crochet this yourself!!!
 
 
Same jacket, shorter length, narrower trim (1" 2.5cm). I used the same steps to make the jacket as explained above.
 
Here's the jacket, front and back.
 


I think this is a look your Barbies will adore this summer!!!!!

Follow us on Twitter: @FashDollStylist
Like us on Facebook: www.facebook.com/FashDollStylist
We're also on Pinterest: www.pinterest.com/FashDollStylist
Come show us your stuff and join the fun on Instagram: www.instagram.com/fashiondollstylist

All photos and text property of Fashion Doll Stylist. 2016. Please do not reproduce without prior permission.

You Might Also Like

0 comments